Laser Printer Solutions Common fault!

Laser printers as the most popular office equipment, offers high efficiency and comfort in our daily lives, and its excellent print quality and speed efficient. In today's society, time is better than nothing, a laser printer for the needs of working professionals. It seems that only a laser printer works, but you are at a loss if the strike is at a critical moment. If a laser printer, the first solution to this problem that arises for us is to get help from a technician. In the process of waiting through a mass of precious time is lost. You thought about the repair of your laser printer for you? Most printer malfunction, the result of misoperation or neglected maintenance. Now we will learn different techniques, the problems of the printer. Then you can look at themselves, and only on the symptoms and causes.

We are classified in different types of dysfunction and the relative importance of each decision.

First, a letter describing the problem:

1. The document was too rigid and too thick, we recommend using the thinner.
2. This document contains, in the opposite direction, please change.
3. The surface of the paper is too smooth, and changes in gross.
4. The film does not comply with the rules, please change in the laser film.
5. This is a wet and a change of dry matter.
6. Carbon powder is of low quality and changes in best.

Secondly, the color of the paper is too superficial

1. Organic Photo Conductor drum too old to get better.
2. magnetic rollers is carried out, please repair or modification.
3. The transfer roller is dirty or over, please clean or change.
4. Roll feed, please change.
5. Coal dust is too bad or not, please change.

Thirdly, there is the vertical stripes on the paper for printing:

1. The magnetic roller is scratched, if they are connected with other components, or simply because the blade is loaded, so that scratches the surface of the magnetic rollers.
2. Edge of the blade is not strong or too much accumulated dust.
3. Carbon dust can not be displayed or even in the way the group showed
The development of roles.
4. free of carbon powder in a magnetic roller dung.
5. is that at the entrance to the "juser".
6. Heat roller stuck in the coal dust and other impurities.
7. Organic Photo Conductor drum badly scratched, it can not, carbon powder.
8. There is a ground wire to the erosion of the object in a series of strain in the organic photo conductor drum is not charged, so that some white stripes.
9. The voltage is too low load evenly, it seems some white streaks of different bandwidth and vague.
10.transfer electrode is usually too dirty transmission.
11. Dust is one of the carbon, and this separation claw.

Forth, all black and white image:

1. Or scan control circuit is broken;
2. Laser and laser-control system is damaged;
3. The optical system is protected, or the reflector is too old or too dirty;
4. Scan driver circuit will be disabled in order to disorder.
5. Electrode pressure series electrode wire is damaged or disturbed;
6. wheels can not be organic photo conductor drum for rotating the wheels, because they are not good.

Fifth, dirty pictures:

1. The surface of the organic photo conductor drum is scratched or dirty.
2. This is a solid carbon powder on the development of functions in the super-adsorption capacity.
3. Cleaning device organic photo conductor drum is damaged.
4. The transfer electrode or electrodes in the free series is one-sided.
5. Pick Roller coal dust.

Sixth, white spots on black images:

1. photographic emulsion layer of the organic conductor drum tanks outside.
2. There are impurities in the carbon powder.
3. The voltage is too high, the organic photo conductor drum.

Seventh, back of the paper is contaminated:

1. Coal dust from the work or roller bearings come in clean paper.

The shell above, in particular, the disadvantages resulting from cleaning the printer components. Thus, we will solve the problem, most often used when a piece of cotton with alcohol to scrub the surface of the printer. However, if there are any problems with the motherboard or hardware, this is the best that the professional staff.